Please Support My Sponsors:
These People Are Virtually My Friends:
- Hey, Wanna Meet Up In Exeter Next Month?
- Book Review: Contemporary Upholstery by Hannah Stanton
- Like a Test Post, Only Weirder
- I Made A Thing! And Some Moving News
- The Depression Vacation
- Manic Monday Linky Party
- Book Review: The Complete Machine Quilting Manual
- (I’m in) Sewing World Magazine ;)
- Manic Monday Linky Party
- Friday Feature and Finishes
What’d she say?
About Me:I'm a geeky, happy, sewing-obsessed wife, mother and crafter. I'm an American living happily in the UK with my lovely husband and tween daughter. I create handmade handbags, quilts, and other accessories. I love writing my blog and publishing craft tutorials, and I also write quilt and bag patterns. If you're looking to be featured or want other information, email me at jennaexcell(@)gmail.com
Tag Archives: zippy bag tutorial
Hi, lovely to meet you, I’m Katy from The Littlest Thistle. When Jenna knew she would be languishing in her sick bed recovering from her very painful operation for a couple of weeks, she sent out a distress call for guest bloggers, and lacking any other options, you got me at the tail end of all the other fab guests :oD Hope you’re now enjoying life stitch free Jenna!
Anyway, my adoring long suffering readers voted a few weeks ago for what I would do, and despite a bit of a last minute surge, the cool bag for a lunch box was beaten into 2nd place by the zippered pouch with the zippered inner pocket – apparently you can’t have too many pouches in your life :o) I do apologise now for the photo overload, I might have got a leeetle bit carried away…
This is what we’re aiming for:
I’ll confess now, I’m a Pips lover. It hit me during Cindy’s Mug Rug And Goodie Swap last month, and it was my first choice for this, a bigger and more complex version than the one I made for the swap.
You will need:
- 13″ x 9″ ‘feature’ fabric – in my case the Girl On A Tree Swing, Sherbet Pips by Aneela Hoey for Moda
- 16″ x 9″ ‘secondary’ fabric – in my case the Skipping Squares, Sherbet Pips by Aneela Hoey for Moda
- 1 fat quarter lining fabric – in my case Diamond Dots from Westminster Fabrics
- 1 fabric scrap 2 1/2″ x 6″ – I used a leftover piece of lining material for a pop of colour
- 2 x 12″ x 9″ fusible medium to heavy weight interfacing (not pictured)
- 1 12″ zip
- 1 7″ zip
- thread to match/highlight fabric
- narrow double sided sticky tape (not pictured)
Your seam allowance is 1/2″, and for all stitching, backstitch 2-3 stitches at the start and end to secure.
Step 1: Cut and prepare your outer fabric:
- Take your ‘feature’ fabric and cut it in half to get 2 pieces 6 1/2″ x 9″
- Take your ‘secondary fabric and cut it into 4 pieces 4″ x 9″
- Take your fabric scrap and fold it in half lengthwise, and press, then open it out, and fold both edges into the middle crease and press again. Finally fold it in half again along the middle crease and press again – you have effectively created double fold bias tape
Step 2: Cut and prepare your lining fabric:
- You can get this out of a fat quarter and have leftovers if you cut carefully. Place your FQ so that the short side is across the top and the long side coming down towards you
- 1st make a cut 12″ down by 18″ across, then cut this in half to get 2 pieces 12″ x 9″
- 2nd make a cut 6″ down by 18″ across, then cut this in half to get 2 pieces 6″ x 9″
Step 3: Sew your front and back outer panels:
Take your ‘secondary’ pieces and pin one on either side of each ‘feature’ piece, long sides matching, right sides together (RST). Stitch in place, then press the seams towards the ‘secondary pieces’ – this is really important!
Step 4: Interface your front and back outer panels:
Take your interfacing, and press it onto the back of your stitched pieces as pictured, ensuring those seams are still pointing towards the ‘secondary’ fabric.
Step 5: Topstitch your front and back outer panels:
Take your front panel and topstitch about 1/8″ from the seam on the ‘secondary’ fabric side (this will now hold that seam firmly in its place), repeat for the other side on the front, and for the back panel.
Now set your front and back panels aside.
Step 6: Prepare your inner pocket zipper:
Take your 7″ zip, and hand sew the open end above the zipper end together as pictured. Trust me, you want to do this, your life will be easier later ;o)
Step 7: Measure and mark up your inner pocket piece for your zipper:
Take one of your 6″ x 9″ pieces of lining fabric and measure 2″ down from one long edge and 1″ in from one short edge, then draw a line 7″ long parallel to the long edge as pictured. I used vanishing marker as that was to hand, but as this won’t be seen, chalk or wash out marker would work just as well.
Measure 1/4″ on either side of this line, and draw a parallel line each side, joining the ends, then draw a line in at an angle from each corner, meeting 1/4″ along the mid line as pictured.
Step 8: Stitch your inner pocket zipper opening:
Take one of your 12″ x 9″ lining pieces, line the pocket up 1″ down from one long edge and 1 1/2″ in from one short edge and pin in place as pictured. Stitch all the way around the marked rectangle, ignoring the midline and angled lines.
Step 9: Cut your inner pocket zipper opening:
Take a pair of very sharp pointed scissors and cut down your marked midline and up your angled lines. Cut very carefully as close to the stitching as you can at the corners – the closer you can get this, the flatter this will lie when turned through.
Step 10: Turn your inner pocket zipper opening:
Pull your cut line open a little, then take your pocket piece and pull it through the opening.
Press in place
Step 11: Insert your inner pocket zip:
Now for your best ‘Blue Peter’ moment, take your zip and your double sided tape. Place a strip of tape at either edge of the zip as pictured. Peel off the backing tape, and line up the zip under the opening created above, with the zip teeth and zipper on the lining side, and stick in place. The tape will save using pins which could shift about, and if it’s a good enough technique for Lisa Lam, it’s good enough for me ;o)
Stitch the zip in place about 1/8″ from the edge of the opening all round, as pictured, then peel the tape off again.
Step 12: Sew your inner pocket together:
Flip your lining piece over so that the pocket side is facing upwards, then take your second 6″ x 9″ piece and place it on top, RST, then pin in place.
Carefully pulling your lining piece out of the way, stitch all the way around the inner pocket.
Step 13: Attaching the main zip:
For this step I’m going to send you away to Bree, from My Crafty Crap, who wrote the perfect zip insertion tutorial for a tutorial on Sew Sweetness. You will need your inner and outer panels, your 12″ zip, and your bias tape you created earlier. Off you pop, and come back once you’ve got both your outer and inner panels attached to the zip just before she adds the loop to one outer panel.
Step 14: Sewing the pouch together:
Welcome back :o) You should now have something that looks like the above pictures.
Now OPEN THE ZIP! Trust me that you do not want to forget this, unless you are a particularly good contortionist (and even then I wouldn’t recommend it)
Fold your pieces away from the zip so that you have your lining panels RST and your outer panels RST, and pin in place as pictured.
Leave an opening in your lining about 5″ wide, marking either end as pictured (I use double pins end on for this, but whatever works for you)
Stitch all the way around from one set of double pins to the other, making sure you don’t catch your zip ends in the seam (you may need a teeny deviation from your 1/2″ seam allowance here)
Step 15: Boxing your pouch:
Well I hope you don’t want to actually fight your pouch at this stage, but we’re going to create the boxed ends.
Starting with the outer pouch, take one corned and fold it so that the bottom seam and side seam meet and line up with each other, and the pouch body comes away in a triangle from the corner. Pin this in place (it was straight above, honest, the photo was a little wonky ;o) ) Grab a ruler and with the 1 1/2″ mark in line with the seam, measure until the 0″ and 3″ marks hit the edge of the pouch, and draw a line across as pictured. Again I used vanishing marker, but again it won’t be seen down the line. Stitch along this line.
Repeat with the other outer pouch corner and both inner pouch corners so that it looks like you have 2 sets of bunny ears. on your pouch.
Take a rotary cutter or scissors, and trim off the bunny ears about 1/8″ – 1/4″ from the stitching as pictured.
Step 16: Turning your pouch the right way out:
Using that opening you left in the lining, turn the entire pouch the right way out, leaving the lining pulled out of the pouch as pictured.
Pin the opening closed, with the seam allowance tucked in.
Step 17: Closing your pouch lining:
Okay, now after I got irrationally annoyed recently by someone supposedly demonstrating back stitch on a blog which very definitely was NOT back stitch, I’m not going to give this next bit a technical name, I’m just going to call this ‘Katy’s closing stitch’ okay?
Thread up a sewing needle with thread that matches your lining and tie a few knots in the end on top of each other (I know, I’ll probably get shot in front of the great and the good of the sewing community here ;o) ). Now take the needle under the seam allowance on one side, and come up as close as you can to the stitching leading away from the opening, as pictured.
Taking teeny, tiny stitches that only catch about 2 threads of the lining fabric on either side of the opening, sew across the opening threading the needle through diagonally with each stitch, always working top to bottom as pictured.
Go all the way to the end of the opening, then take 3 stitches on top of each other, and finish by pushing the needle through along the seam a little, as pictured, and cutting off the trailing thread at the seam.
Step 18: The finished product:
Whew, you’re done! Push the lining into the pouch, and admire all your hard work.
Well done if you made it all the way through this :o) This coming weekend I’ll be posting a tutorial on my blog to make an extra special custom zipper pull for this.